ELEGOO MercuryPlus 2 in 1 Washing and Curing Machine

€126,45 €165,77
Banggood
ELEGOO MercuryPlus 2 in 1 Washing and Curing Machine
ELEGOO MercuryPlus 2 in 1 Washing and Curing Machine
€126,45 €165,77

SaveSavedRemoved 0

ONLY €126,45 for ELEGOO MercuryPlus 2 in 1 Washing and Curing Machine for LCD/DLP/SLA 3D Printed Models with 360-degree Rotating Turntable – UK Plug

 

*PLEASE NOTE that to avoid customs duties, select Banggood Express or EU Priority Line

 

For more ELEGOO offers – HERE
For Banggood Coupons see – HERE

 

 

Join Our Telegram Channel

 

Features:

  • [Dual Function] Wash and Cure 2 in 1 design makes washing and curing for 3D printed models realized in one machine. The operating process is now more efficiency with less effort to meet your different needs.
  • [Flexible Washing Mode] The models can be placed in the cleaning basket to clean separately, or mount the build plate with models on it and wash them together, which can avoid direct contact to uncured resin. The height of the platform bracket can be adjusted to fit the liquid level in the bucket.
  • [Intelligent Curing Control] Built-in 8pcs 385 nm plus 8pcs 405 nm UV curing lamp beads, work together with the 360-degree rotating curing turntable, which can cure the models evenly. 0.96-inch TFT LCD screen can visually display the set time and the remaining time. With automatic protection, picking up the cover in the operating state will suspend operation and emit a beeping sound. The cover can block 99.95% of ultraviolet rays to protect your vision.
  • [Ideal Compatibly] compatible with most of the LCD/DLP/SLA 3D printers like ELEGOO Mars, Mars Pro, Mars C, photon, photon s on the market, which provides you an ideal support for your 3D resin prints.
  • [Special Notes] The washing function is not quite suitable for 3D models printed with water washable resin, which is better to be washed with running water.

Operation Instructions:

  • After the model is printed, please clean and blow-dry the model before putting it into the machine.
  • If the model become yellow after curing, please reduce the curing time. Over curing will lead to a yellowish model.
  • Recommended ambient temperature is 0-40 degrees, and the ambient humidity temperature is 20%-50%.
  • Please do not use it for more than 40 minutes at a time to avoid overheating
  • Cure Time: If model diameter less than 30 mm, the curing time is recommended to be 2 minutes. If the surface structure of the model is complex, it is recommended to increase the curing time properly.
  • Special Notes: The washing function is not quite suitable for 3D models printed with water washable resin, which is better to be washed with running water.

 

ID:1823862 – SKUH38048

1823862CN

Kupon4U.com
Logo
Enable registration in settings - general